B4.1. Wps - Pbc (Push Button Configuration) - Encore ENUWI-2XN4x User Manual

B4.1.
Push Button Configuration (PBC) allows your computer to connect to a wireless network
by the click of a button. You do not need to memorize your router or access point's wireless
security password.
point to see if it supports WPS - PBC.
an icon like the one on the right.
Note: Before you start, please have your wireless router and your computer
This is just temporary. You can place your router or computer anywhere you want
afterward.
A.
B.
WPS — PBC (Push Button Configuration)
Please check the user manual of your router or access
Normally, the PBC button comes with
www.encore-usa.com
1. Go to the "Wi-Fi Protected Setup" tab.
2. Click on "Push Button Config (PBC)."
3. Within two
WPS-PBC button on your router or
access point.
Note: Please follow the instructions in the
user manual of your router or access point.
Once connected, the tab will

automatically switch to the "General"
tab. The 'Signal Strength' and 'Link
Quality' bars will become active and
green.
Note: The 'Encore Wireless Manager
Tray Icon' at the lower right corner of the
screen will become green as well.
28
in close
minutes, press the
range.