Makita GS5000 Instruction Manual
Straight grinder
Hide thumbs
Also See for GS5000:
- Instruction manual (77 pages) ,
- Instruction manuals (13 pages) ,
- Technical information (9 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita GS5000
Summary of Contents for Makita GS5000
- Page 1 INSTRUCTION MANUAL Straight Grinder GS5000 GS6000 013595 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model GS5000 GS6000 Maximum wheel capacity (diameter x thickness) 125 mm × 20 mm 150 mm × 20 mm Spindle thread M14 or 1/2" (country specific) No load speed (min 5,600 With support cover 590 mm... - Page 3 Do not abuse the cord. Never use the cord for Power tool use and care carrying, pulling or unplugging the power tool. 18. Do not force the power tool. Use the correct Keep cord away from heat, oil, sharp edges or power tool for your application.
- Page 4 GEB108-3 protectors, gloves workshop apron capable stopping small abrasive STRAIGHT GRINDER SAFETY workpiece fragments. The eye protection must WARNINGS be capable of stopping flying debris generated by various operations. The dust mask or respirator Safety Warnings Common for Grinding Operation: must be capable of filtrating particles generated This power tool is intended to function as a by your operation.
- Page 5 operator, depending on direction of the wheel’s Flanges for cut-off wheels may be different from movement at the point of pinching. Abrasive wheels grinding wheel flanges. may also break under these conditions. f) Do not use worn down wheels from larger Kickback is the result of power tool misuse and/or power tools.
-
Page 6: Functional Description
FUNCTIONAL DESCRIPTION ASSEMBLY CAUTION: CAUTION: Always be sure that the tool is switched off and Always be sure that the tool is switched off and • • unplugged before adjusting or checking function unplugged before carrying out any work on the on the tool. -
Page 7: Operation
For all tools Securing method for type B and C Type A 1. Screwdriver 2. Hex wrench 1. Lock nut 3. Inner flange 2. Grinding wheel 4. Hex nut 3. Spindle 013670 Insert screwdriver into the hole in the inner flange. Grip 013674 Securing method for type A the hex nut with the wrench, turning in the direction of... -
Page 8: Maintenance
Also lift it up near the hook A. 013619 NOTE: Dust cover attachment R/L are respectively installed on Dust cover attachments installed on GS5000 and the handles R/L with the sides shown above facing GS6000 do not cover the vents above and below the toward the tool. -
Page 9: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Hex wrench • Wrench holder • NOTE: Some items in the list may be included in the tool •... - Page 12 Makita Corporation www.makita.com 885199-0...