Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.
Advertisement
Table of Contents
Related Manuals for Clarke 07097A
Summary of Contents for Clarke 07097A
- Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
- Page 2 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke American Sanders machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
-
Page 3: Table Of Contents
Products in such environments. The Manufacturer disclaims any responsibility to advise purchasers of any specific requirements that may be applicable to the use of the Products in such environments. - 2 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual... -
Page 4: Operator Safety Instructions
• Do not empty the contents of the dust bag into a fire. • Hitting a nail while sanding can cause sparks and create an explosion or fire. Always use a hammer and punch to countersink all nails before sanding floors. Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. - Page 5 Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and repairs performed by unauthorized personnel will void your warranty. Servicing of this unit must always be referred to an authorized Clarke American Sanders distributor. CAUTION: Use of this equipment to move other objects or to climb on could result in injury or damage.
-
Page 6: Introduction And Machine Specifications
12m H07RN F3G 1.5mm Dimensions 356 x 260 x 343mm (14 x 10½ x 13½) Weight 14.5 kg (32 lbs) Shipping Weight 21 kg (46 lbs) Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 5 -... -
Page 7: Machine Set-Up
4. To empty the dust bag, unzip the disposal flap and force contents out by inverting the bag. NOTE: For best results, empty frequently. Follow all warnings posted in this manual and on the dust bag. - 6 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual... - Page 8 Gearbox damage could result from machine resting upside down for extended periods of time. Lubricant may drain from gearbox. Always return machine to upright position after installing abrasive. Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 7 -...
-
Page 9: How To Operate The Machine
Empty dust bag into a metal container, clear of any combustibles. Do not empty content into a fire. Do not overfill dust bag. - 8 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual... -
Page 10: Sanding Cuts And Sandpaper
945605/500 120 grit For finishing cut on certain conifers. 945606/300 150 grit For finishing cut on certain conifers where a smooth surface is desired. Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 9 -... -
Page 11: Maintenance
Maintenance and repairs performed by unauthorized personnel will void your warranty. Servicing of these units must always be referred to an authorized Clarke Ameri- can Sanders distributor. The Dust Control System Figure 5 Remove the dust from the bag when the bag is full or when the efficiency of the dust control system decreases. -
Page 12: Lubrication
Damage could occur to the gear box. 5. Remove the cover from the gear housing. 6. Remove the old lubricant from the gearbox. 7. Add ten ounces of Clarke American Sanders lubricant to the gearbox. Figure 10 CAUTION: To prevent damage to the motor, do not add more than ten ounces of lubricant to the gearbox. - Page 13 15. Install the motor cover. - 12 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual...
- Page 14 7" Spinner 7" Spinner 7" Spinner 7" Spinner 7" Spinner Edger (CE) Edger (CE) Edger (CE) Edger (CE) Edger (CE) Section II Parts and Service Manual (70162B) Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 13 -...
-
Page 15: Assembly Drawing #1
Model B-2 7" Spinner Edger (CE) Drawing #1 12 13 - 14 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual... -
Page 16: Assembly Parts List #1
Adaptor, 2" Tube x 1½" Hose Note: Ref #19 (19901A) includes Ref. #'s17, 38, 39, 40 (2), & 41 Note:Ref #42 (12203A) includes #'s 17, 18, 38, 39, 40 (2) &41 Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 15 -... -
Page 17: Assembly Drawing #2
Model B-2 7" Spinner Edger (CE) Drawing #2 9 10 - 16 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual... -
Page 18: Assembly Parts List #2
Gear - Pinion 30050A Case, Carrying 56380639 Decal-Prop 65 [ ]# 56380216 Decal-Power Tool Warning [ ] = Not Shown # = New or Revised Since Last Update Clarke ® American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 17 -... -
Page 19: Wiring Diagram 11/99
Model B-2 7" Spinner Edger (CE) Wiring Diagram 11/99 - 18 - FORM NO. 70162B Clarke ® American Sanders B-2 (CE) Operator's Manual... - Page 21 14600 21st Avenue North Plymouth, MN 55447-3408 www.clarkeus.com Phone: 800-253-0367 Fax: 800-825-2753 ©2010 Nilfi sk-Advance, Inc. A Nilfi sk-Advance Brand...