Boss Audio Systems 755DBI User Manual page 8

using Remote Control..•
CD
POWER Use to turn Receiver ON or
OFF.
®
TUNE/SEEK
(~
and m )
Press to skip ahead or back one station
in tuning range of the radio band. Press
and hold to seek the next station up or
down the radio band.
®
EQ (Preset Equalizer Curves)
Press repeatedly to cycle through four
modes: FLAT, ROCK, POP or CLASSIC.
o
MUTE Press this button to silence the 9
audio. Press again to restore the previous
audio volume level.
®
VOLUME - / VOLUME + Use to
increase or decrease volume level.
®
LOC (Local/Distant select) In some
areas, reception of an FM station may
be weak. Changing the reception mode
to LOC by pressing this button allows
the receiver to skip the weaker signals.
Press again to return to DISTANT mode.
o
SELECT Press this button to cycle
12l------1
through the various sound parameters
which are available for adjustment:
@
VOLUME> BASS> TREBLE> BALANCE
> FADER> EO
RADIO> USB> SD CARD>
AUX IN > iPod > BLUE (Bluetooth)
Please note:
iPod Mode can only be selected if an
iPod is present in the dock.
~
BAND .
Press briefly, repeatedly to cycle
between the five radio bands:
FM1 > FM2 > FM3 > AM1 > AM2
@
SOURCE (Input select, same as
MODE on head unit)
Press briefly, repeatedly to cycle
between the six audio input modes:
MO/ST In some areas, reception of an
FM station may be weak. Changing the
reception mode to MONO by pressing
this button may improve the reception.
Press again to return to STEREO mode.
®
®
RADIO PRESETS 1-6
After you have programmed the presets
via the front panel, you can use buttons
1-6 to select the preset stations.
®
AMS (Automatic Music Scan)
This is a quick and convenient way to
set up presets in your radio. If you press
AMS, the radio will scan up each radio
band and assign presets to the
strongest stations it finds. Please note
that if you do this, all your previous
presets will be lost.
®
LOUDNESS
Press to increase the level of bass
output. Press and hold again to turn off
the Loudness function.
755061 User's Manual - page 7