Assembly - Metrologic MS9500 Voyager series Installation And User Manual

A
SSEMBLING THE
There are two options for assembling the stand. The first option is a self-
supporting stand that can be moved freely about on the countertop. The second
option is used if the stand will be bolted or hard-mounted to the countertop.
Stand Option 1: Self-Supported Stand Kit #46-46128
Step 1
Slide the apron (
over the stand (
MLPN
Step 2
Position the stand so that it sits
under the tab on the apron.
Then secure the apron to the
stand using the two M3 x 6 mm
screws ( 18-18670) and the
MLPN
two #5 washers (
provided.
Stand Option 2: Hard-Mount Accessory Kit #46-46351
2.00 in
2.00 in
Figure 17.
#8 Wood
Screw
Figure 18.
12
S
TAND
50-50440)
MLPN
36-00454).
18-18671)
MLPN
Base
Apron
Tab
M3 x 6 mm
Screw
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base (
to the countertop with the four #8 wood
screws ( 18-18057) provided.
MLPN
Apron
Stand
Figure 15.
Figure 16.
36-36080)
MLPN
Stand
#5 Washer