Table of Contents
Advertisement
submenu appears in a second row with the selected
option highlighted in light blue.
2.
Select a new value by pressing the
22) on the remote control or the
or
the joystick.
3.
Confirm your selection by pressing the
buttons (14, 17, 19) on the remote control, or the
button (8, 9) on the joystick. The new value is
highlighted in light blue and setup is complete.
Table 7: ASP Config Menu Features
Setting
Options
Function
Bass Center
60Hz
According to the audio source, select
Freq
the Bass Center Frequency to
80Hz
achieve the best Bass effect.
100Hz
130Hz
150Hz
200Hz
Treble Center
10KHz
According to the audio source, select
Freq
the Treble Center Frequency to
12.5KHz
achieve the best Treble effect.
15KHz
17KHz
Sub.W Filter
80Hz
Selecting a crossover frequency sets
a cut-off frequency of the subwoofer's
120Hz
LPF (low-pass filter) and the
"SMALL" speakers' HPF (high-pass
160Hz
filter). The Crossover frequency set-
ting has no effect if the subwoofer is
set to "OFF" and any other speaker is
set to "LARGE".
Sub.W Phase
0D
Subwoofer output IN phase
180D
Subwoofer output OUT OF phase
NOTE: Depending on your installa-
tion, reversing the subwoofer phase
may increase Bass output.
Bass Q-Factor
1.0
When the Bass Center Frequency is
selected, adjusting the Bass Q-Fac-
1.25
tor alters the sharpness of the Bass
output.
1.5
2.0
BACK
Return to previous menu.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SYS SETUP button (31) on the remote control or the DISP
button (13) on the front panel.
MULTI-ZONE OPERATION
Independent sources can be played simultaneously on the
or
buttons (14,
VM9020TS. For example, a video game console can be seen
buttons (6, 7) on
on the front screen while DVD video is available to rear
passengers. For example, DVD is selected as the front
,
, or
source and SD Card is selected for the rear source or SD
or
Card is selected as the front source and DVD is selected for
the rear source. In the first case, both sources will switch to
SD Card. In the second case, both sources will switch to the
DVD source because the multimedia processor is shared
between optical and SD Card media.
Selecting a Source for the Front Zone
To access the FRONT ZONE SOURCE MENU, touch the
TFT screen in the top left corner of the screen.
This menu allows you to select a source for the front zone.
Selecting a Source for the Rear Zone
To access the rear zone SOURCE MENU, touch the top right
corner of the screen, near the Multi-ZONE icon.
Select the source to be directed to the rear Multi-ZONE RCA
outputs.
NOTE: Optical media and an SD Card cannot be selected
from the Multi-ZONE Source Menu icon simultaneously.
NOTE: The AM/FM tuner graphics will change to a "blue
screen" background when any optical or SD Card media
is selected from the Multi-ZONE menu. In addition, only
the top left (Front Zone Source Menu) and right (Multi-
ZONE Source Menu) quadrants of the touch screen are
active during this mode of operation.
12
VM9020TS
Advertisement
Table of Contents
