Table of Contents
Advertisement
Main Menu
Turn Signal and Headlights
1.
Turn Signal
2.
OFF
3.
Parking and interior lights
4.
Headlights on
5.
High Beams
6.
Flash high beams
62
Table of Contents
Turn Signal
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Headlights
position turns on the parking
lights, taillights, instrument panel
lights, side-marker lights, and rear
license plate lights. Turning the
switch to the
the headlights. If you leave the lights
on with the key removed from the
ignition switch, you will hear a
reminder tone when you open the
driver's door.
Push down on the
Turning switch to the
position turns on
Push the lever back
High Beams
until you hear a click to turn on the
high beams. The blue high beam
indicator will come on (see page
Pull the lever back again to low
beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
).
56
Advertisement
Table of Contents
