Table of Contents
Advertisement
Main Menu
SCAN
The SCAN function
samples all tracks/files on the
selected disc in the order they are
recorded. To activate the scan
feature, press and hold the SCAN
button until you hear a beep. You will
see SCAN in the display. You will get
a 10 second sampling of each track/
file on the selected disc. Press the
SCAN button again to get out of scan
mode and play the last track/file
sampled.
Pressing either side of the SEEK/
SKIP button also turns off the scan
feature.
Table of Contents
FOLDER-SCAN
when activated, samples all files on
the selected folder in order. To
activate the folder scan feature,
press and hold the SCAN button
until you hear a beep. You will see
SCAN in the display. The
system will then play the first file for
about 10 seconds. If you do nothing,
the system will then play the first file
in each folder for 10 seconds. When
it plays a file you want to continue
listening to, press the SCAN button
again.
Pressing either side of the SEEK/
SKIP button or selecting a different
folder with the FOLDER knob also
turns off the scan feature.
This feature,
To Stop Playing a Disc
Press the eject button (
remove the disc. If you eject the disc,
but do not remove it from the slot,
the system will automatically reload
the disc after 15 seconds and put it in
pause mode. To begin playing, press
the CD/AUX button.
Press the AM/FM button to switch
to the radio while a disc is playing.
To play the disc, press the CD button.
If you turn the system off while a
disc is playing, either with the PWR/
VOL knob or by turning off the
ignition switch, the disc will stay in
the drive. When you turn the system
back on, the disc will begin playing
where it left off.
Playing a Disc
) to
111
Advertisement
Table of Contents
