Table of Contents
Advertisement
Main Menu
DRIVER'S WINDOW SWITCH
MAIN SWITCH
Turn the ignition switch to ON (II)
to raise or lower either window. To
open the window, push the switch
down and hold it. Release the switch
when you want the window to stop.
Pull back on the switch and hold it to
close the window.
Table of Contents
Closing a power window on
someone's hands or fingers can
cause serious injury.
Make sure your passenger is
away from the window before
closing it.
AUTO
To open/close the driver's
window, push the window switch
firmly down or up to the second
detent, and release it. The window
will automatically go up or down all
the way. To stop the window, pull/
push on the window switch briefly.
If the MAIN switch is OFF, the
passenger's window cannot be raised
or lowered. Keep the MAIN switch
off when you have children in the
vehicle so they do not injure
themselves by operating the
passenger's window unintentionally.
Power Windows
AUTO REVERSE
If the driver's
window senses any obstacle while it
is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
If your vehicle's battery is
disconnected or goes dead, or the
driver's window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
1.
Start the engine. Push down and
hold the driver's window switch
until the window is fully open.
2.
Pull and hold the driver's window
switch to close the window
completely, then hold the switch
for a second or two more.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
81
Advertisement
Table of Contents
