Bang & Olufsen BEOLINK VIDEO User Manual page 7

Beovision MX 7000/6000/4000 labelled BEO4
on the rear cover and no second video
tape recorder in the main system
Beovison MX as mentioned above and a
second video tape recorder in the main
system
Beovision MX 7000/6000/4000 not labelled
BEO4 on the rear cover
or
LX 6000/5500/5000
Beovision MX 5500/3500
or
LX 4500/4000
Other TV's mentioned in this guide
• Select LINK, TV on the Beo4.
• Tune the TV to the video transmission frequency of
the main system and store this frequency on P60.
• Store the video transmission frequency on P60 as
explained above.
• Select V.TAPE 2 on the Beo4 and then unplug the Audio
Aux Link cable (see p. 4).
• Tune the TV to the video transmission frequency of
the second video tape recorder and store this frequency
on P61.
• Finally, insert the Audio Aux Link cable again.
• Select V.TAPE on the remote control and then unplug
the Audio Aux Link cable (see p. 4).
• Tune the TV to the video transmission frequency of
the main system and store this frequency on P60, P61,
P63 and P64. (The transmission frequency of a second
video tape recorder, if any, must be stored on P62).
• Finally, insert the Audio Aux Link cable again.
• Select V.TAPE on the remote control and then unplug
the Audio Aux Link cable (see p. 4).
• Tune the TV to the video transmission frequency of
the main system and store this frequency on P46, P47,
P49 and P50. (The transmission frequency of a second
video tape recorder, if any, must be stored on P48).
• Finally, insert the Audio Aux Link cable again.
• Select LINK, V.TAPE on the remote control.
• Tune the TV to the video transmission frequency of
the main system and then press SHIFT, 2. Store this
frequency on a program number, which is not
occupied.
7