Bang & Olufsen BEOLINK VIDEO User Manual page 2

When you set up your BeoLink
Video kit, we recommend the
following sequence:
1 Switch off all products and
disconnect from the mains.
2 Make your installation.
3 Connect all products to the
mains.
4 Carry out the programmings.
B E F O R E
Setting-up guide
This guide describes how to in-
stall your BeoLink Video kit in
a BeoLink distribution system.
This kit enables you to connect
and use a Beovision TV (of a
model with no BeoLink connec-
tion) as an extra TV in such a
system.
If you have never carried out
cable installations before, we
suggest you leave it to your
Bang & Olufsen dealer. Like-
wise, we recommend that you
follow the instructions in this
guide carefully.
The User's guide, which is
also supplied with the BeoLink
Video kit, describes how to
operate your link system once
it has been installed.
The following Beovision TV
models can be used as an extra
TV in the link room:
• Beovision MX 7000/6000/
4000 and LX 6000/5000/5500/
4500
• Beovision MX 5500/3500 and
LX 5000/4000
• Beovision MX 5000/4500 and
MX 3000
• Beovision LX 2802/2502 and
LX 2800/2500
Y O U S T A R T ...
BeoLink system
The BeoLink distribution system
enables you to control any
source in your main system and
to see and hear it in the link
room. Of course, you can still
use your extra TV quite inde-
pendently of the TV in your
main system.
Your link room must be con-
nected to the main room via a
special (BeoLink/ML) cable. To
join the BeoLink cable from the
main system and the cable from
the BeoLink Video box you will
need a junction box. Further-
more, in order to complete your
installation, you will need an
ordinary aerial cable and the
appropriate plugs.
These accessories can be pur-
chased at your Bang & Olufsen
dealer.
Depending on age, your extra
TV may need modification in
order for the setup to function
optimally (please contact your
Bang & Olufsen dealer).