BMW K 1200 GT Rider's Manual page 128

light bulb) in lamp housing by
8
turning clockwise.
126
Insert lamp housing with retain-
z
ing pins 7 in brackets 6. Make
sure cables are not pinched.
Install screws 1.
Replacing front turn
indicator bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screw 1.
Pull out lamp housing toward
front
Disconnect connector 2.
Turn bulb holder 3 counter-
clockwise to remove it from
bulb housing.