Tighten clamp 3 on muffler to
8
appropriate torque.
Muffler on manifold
118
26 lb/ft (35 Nm)
z
If the gap between the rear
wheel and the muffler is too
small, the rear wheel can over-
heat.
The gap between the rear wheel
and the muffler must be at least
15 mm.
Install screw 4 for bracket of
muffler on passenger footrest
with appropriate torque.
Muffler on passenger
footrest
16 lb/ft (22 Nm)
Push muffler cover 2 with
guide A into brackets B.
Install bolt 1 of muffler cover.
Front wheel stand
Use
A front-wheel stand for simple,
safe changing of the front wheel
is available from BMW Motor-
rad. The front wheel stand with
the BMW special tool number
36 3 971 can be obtained from
your authorized BMW Motor-
rad retailer. You also need the
adapters with the BMW special
tool number 36 3 973.