come out from the slot under the H cover.
13. In OS-203 Peel-off mode, if a misaligned loading occurs
keep pressing the "FEED" button to back-feed and reload
the label stock.
14. To remove any slack, rewind the media onto the roll.
Press down the print head module firmly.
H Cover
Feed Button
Slot
15. Close the top cover and turn on the printer or press the
24
"FEED" button if the printer is already on.
Note: The "FEED" button does not make the printer peel.
Peeling occurs only when the software is properly set.
Label
25