Installation And Connection - Hyundai H-LCD700 Instruction Manual

Installation and connection

Stand installation:
Fix the ironware up to the unit with the four screws included.
Release the metal washer on the top of the stand but do not separate it from the
stand.
Insert the metal washer with the stand into a hollow at the back of the unit and
move the stand up to a suitable height.
Tighten the screw 1 up on the stand to fix the stand with the unit.
Control the screen angle with the screw 2.
Connection of the antenna:
Plug the antenna into the Antenna jack situated on the rear panel of the unit.
Connection of headphone:
Connect the headphone to the headphone jack for private listening. The speakers will
not operate when headphones are connected.
Connection to power source:
Connect one round end of attached AC/DC adaptor or car adaptor to the power source
input jack and the other end to the wall outlet at the suitable voltage. When in house,
use the AC/DC adaptor; for car use, connect with the car adaptor (adaptors included
should be only used). Press POWER button to turn on the unit.
AV input connection
Connect the AV cable as showed in the picture below. After connection, switch the
unit to the AV mode.
6