Table of Contents
Advertisement
Caution:
1.
Please align the RC with the infrared-receiving window on TV set in operation.
2.
Never squeeze, drop, wet or disassembly the RC.
3.
Never press any button continuously and swiftly. Operation interval is at least 2
seconds.
Battery installation
Insert the battery according to the picture above, observing the correct polarities (+)
and (-). Use one Cr2025 size battery. If the RC fails to work even operated near the
unit, replace the battery. Do not use rechargeable batteries. Remove the battery when
the RC will not be in use for a long time.
Button functions
POWER button: Press this button to turn on or off the unit.
MENU button: Press this button to display the on-screen menu.
AV/TV button: Press this button to switch between video sources.
MUTE button: Press this button, sound disappears; press it again or press
VOL+/VOL- buttons to resume normal sound. When sound is muted, a corresponding
symbol appears on the display.
VOL-/VOL+ buttons: Press VOL- button, the volume of TV set decreases. Press
VOL+ button, the volume of TV set increases.
CH+/CH- buttons: Press CH+ button, the number of TV channel increases. Press CH-
button, the number of TV channel decreases.
Number buttons and two-digit button: When the channel is a one-digit figure, just
press the corresponding number button. If the channel is a two-digit figure, you
should press two-digit button first to show - - on the display screen before further
pressing the corresponding number buttons.
MODE button: Press this button to select picture mode.
5
Advertisement
Table of Contents
