Сonnection; Connection; Outdoor Antenna Connection; Other Connections - Hyundai H-LCD3212 Instruction Manual

Connection

Antenna cable connector
75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.

Other connections

• Connect the audio sources (Including
DVD, VCDR, CAMCORDER and PC) to the
proper AUDIO input jacks 'L' and 'R'.
• Connect the video source to the VIDEO
jack by RCA cable.
• If the video source has a SCART output
jack, you can connect the signal to the monitor
by the SCART cable.
• Connect the video source to the S-VIDEO
input jack of the monitor by the S-video cable
(provided that the video source has S-video
output jack).
• When using the LCD as a computer
TVRF antenna jack
screen, connect the PC to the VGA jack from
the monitor by the relevant cable.
• AC power input is intended for connecting
the unit power cord to current supply mains.
• This unit has PC audio in jack. Connect
this jack to PC main unit with related audio
cable in PC mode and adjust the volume to
what you want.
• Component input YPbPr is intended for
receiving component video signal if connected
to the component output of external source.
• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• If the video source has a HDMI output
jack, you can connect the signal to the monitor
by the HDMI cable.
Connection
5