Panasonic KX-TDA100D User Manual page 165

Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
Calling with the Outgoing Call Log
You can redial using the outgoing call log.
To call
KX-NT300/KX-DT300/KX-T7600
While on-hook
Press Left. Press Up or Down
until desired number
appears.
To call with the REDIAL button
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
call log.*
•
* System programming is required for this operation.
•
This operation is available only for digital proprietary telephones with a display.
To store the caller's information in personal speed dialling
Display PT
When the desired party is displayed
AUTO DIAL
STORE
Press STORE.
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to
"3.1.2 Settings on the Programming Mode".
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
Off-hook.
REDIAL
Press REDIAL
until desired number
appears.
Off-hook.
1.13.1 Using the Call Log
User Manual 165