Maintenance - Plustek Scanner User Manual

If you prefer not to see this reminder message again, you may:
Check the box of [Do not show this message again] within this message
window, and then click [OK] button.
Click on the QuickScan icon
Uncheck [Enable Warning] from the menu that pops up. Click the [No]
button in the message box that appears.
Attention

Maintenance

To keep your scanner working smoothly, take a moment to review the
following maintenance tips.
Caution
• Avoid using the scanner in a dusty environment. When it is not in use, keep the
scanner covered. Dust particles and other foreign objects may damage the unit.
• Do not attempt to disassemble the scanner. There is danger of an electrical shock
and opening your scanner will void your warranty.
• Do not subject the scanner to excessive vibration. It may damage the internal
components.
• Be sure not to bump or knock the scanner glass as it is fragile and could break.
• Clean the scanner glass by lightly spraying a non-abrasive glass cleaner onto a
soft lint-free cloth. Then, wipe the glass thoroughly with the cloth. DO NOT
SPRAY CLEANER DIRECTLY ONTO THE SCANNER GLASS. Excess liquid
residue may fog or damage the scanner.
• Your scanner operates best in temperatures between 10
F).
located on the Windows system tray.
If you would like to be prompted with this message again,
you may click on the QuickScan icon
[Enable Warning] from the menu that pops up. Click the
[Yes] button in the message box that appears.
20
and check
° ° °
C to 40 C (50 F to 104
°