Cleaning; Maintenance; Spare Parts - Lincat ECO8 User Instructions

CLEANING

Important: Take care not to damage the thermostat bulbs inside the
oven when cleaning.
• Clean the unit regularly to maintain efficient performance and hygiene.
• Disconnect the unit from the electricity supply and allow to cool before
starting to clean
• Use a mild detergent in hot water and a soft cloth.
• Do not allow excess water to run into the unit.
• Do not use abrasive creams or scourers.
• Burnt-on food may be removed using Carb'n'off or similar cleaner

MAINTENANCE

The parts listed below can be replaced by the user. No other regular
maintenance is required.
For replacement of parts in the Spare Parts List please contact your dealer.
Door inner 1
glass
2
3
4
Light bulb 1
2
3
Shelf racks 1
2
3
4
5
6
IS331 ECN3191
Slide the glass up and out of the lower clamps
Slide down to remove it from the top clamps
Slide the new glass first into the lower clamps
Clip the glass into the top clamps
Carefully remove the glass cover using a flat-bladed
screwdriver
Unscrew the bulb
Screw in new bulb and replace cover
Swivel shelf locking tabs to allow the shelf to rise upwards.
Lift the shelf rack upwards to free from lower retaining pins
Slide the rack forwards to remove from oven
To refit, slide rack into oven and fit onto upper retaining
pins
Fit over the lower retaining pins
Lock in place by swivelling locking tabs up.
9