SAFETY INFORMATION
To prevent injury to yourself or your staff, and to avoid
damaging the product, please read and follow the safety
precautions below before setting up and using the unit:
•
Remove all plastic coatings and clean the unit before use.
•
Ensure that the electrical supply cable is not damaged. If it is,
it must be replaced by Lincat Ltd or by qualified personnel.
•
Always disconnect the unit from the electricity supply before
servicing.
•
The unit must be earthed.
•
Do not try to modify this unit.
•
Never clean the unit with a water jet.
•
Inform staff that the surfaces and base will become hot.
•
Do not lean over the oven door when opening.
•
Keep these instructions in a safe place for future reference.
IS331 ECN3191
3