Table of Contents
Advertisement
Contents:
Specifications:
Relay On/Off Model:
500 Watts Incandescent
100 Watts Fluorescent at 120 Volts
5 Amps, 450 Watts LED at 120 Volts with
0.8pF driver
5 Amps, 300 Watts LED at 120 Volts with
0.5pF driver
Voltage:
120 Volts AC
Power Consumption:
One watt
UL Listing:
Raintight Photoelectric Switch
Suitable for wet locations.
Time Adjustment:
5 seconds to 15 minutes
Quick Test Time:
5 second test time for fast installation.
Works day or night.
Detection Zone:
Full 180º by 30'
"No Hands" Auto Testing:
Auto mode starts after 3 minutes of
testing. No adjustment needed.
Built for Severe Conditions:
Double weatherproofing for long life.
Photoelectric Control:
Deactivates lights during daylight.
Fully adjustable for 24 hour operation or
custom applications.
Vandal Resistant Lens:
Hard lens resists casual vandalism.
Case Construction:
Precision molded Lexan®
Color Matched Lens:
Dark lens with black units.
White lens with white units.
Surge Protection:
Withstands up to 3000 Volts
Manual Override:
Double flip wall switch logic prevents
activation by short power outages.
Resets to auto at dawn.
No extra wiring needed.
LED Detection Indicator:
Glows red day and night for
"on-guard" deterrence.
RF Immunity:
Circuits fully shielded for maximum radio
frequency immunity.
2
Why RAB Sensors are BEST for You?
Smaller is better!
Mini Sensor uses state-of-the-art surface mount technology (SMT), just like cellular
phones and beepers. SMT gives you more reliability, greater RF immunity, and a
compact sensor that can fit neatly where others cannot.
Wider is better!
The wide 180º view detects movement along the entire side of a building with
only one compact sensor. It will detect people as they exit or enter. It takes several
conventional sensors to get the same coverage.
Molded is better!
No leaky gaskets or bug hotels with Mini Sensor. The hard lens is molded as part of the
case. It's vandalproof, rainproof, bugproof and absolutely sealed.
3
Hide quick links:
Advertisement
Table of Contents
