Specifications - RAB Lighting SmartBox Installation Manual

Contents:
Smart Box
Hex Wrench
Adjustment Tool
Wire Nuts (3)

Specifications:

Model:
120 VAC, 60 Hz
500 W Incandescent
600 W Electronic Ballast (LED)
Voltage:
120 Volts AC
Power Consumption:
One watt
UL Listing:
Raintight Photoelectric Switch
Suitable for wet locations.
Time Adjustment:
5 seconds to 15 minutes
Quick Test Time:
5 second test time for fast installation.
Works day or night.
Detection Zone:
Full 180° by 30'
"No Hands" Auto Testing:
Auto mode starts after 3 minutes of testing.
No adjustment needed.
Mounting Screws (2)
Lens Mask
Gasket
Built for Severe Conditions:
Double weatherproofing for long life.
Photoelectric Control:
Deactivates lights during daylight.
Fully adjustable for 24 hour operation or
custom applications.
Vandal Resistant Lens:
Hard lens resists casual vandalism.
Case Construction:
Precision molded Lexan®
Color Matched Lens:
Dark lens with black units.
White lens with white units.
Surge Protection:
Withstands up to 3000 Volts
Manual Override:
Double flip wall switch logic prevents
activation by short power outages. Resets
to auto at dawn. No extra wiring needed.
LED Detection Indicator:
Glows red day and night for
"on-guard" deterrence.
RF Immunity:
Circuits fully shielded for maximum radio
frequency immunity.
2
Why RAB Sensors are BEST for You?
Smaller is better!
SmartBox uses state-of-the-art surface mount technology (SMT), just like cellular phones
and beepers. SMT gives you more reliability, greater RF immunity, and a compact sensor
that can fit neatly where others cannot.
Wider is better!
The wide 180º view detects movement along the entire side of a building with only one
compact sensor. It will detect people as they exit or enter. It takes several conventional
sensors to get the same coverage.
Molded is better!
No leaky gaskets or bug hotels with SmartBox. The hard lens is molded as part of the case.
It's vandalproof, rainproof, bugproof and absolutely sealed.
3