Barrett 950 HF Operating And Installation Manual page 72

Setting the first page of channel parameters :-
Selcall enable and format select
The
programmed. Select the letter or symbol corresponding to the selcall format required. This
letter or symbol is displayed on the bottom line of the display in the 1st character position.
When no letter or symbol is displayed in this position, no selcall is selected on the channel
being programmed.
Scan enable
Use the scan key to select the scan table required. Select the symbol corresponding to the
scan table required. This symbol is displayed on the bottom line of the display in the 2nd
character position.
No symbol displayed in this position indicates this channel will not be programmed for scan.
Low power
The
The low power symbol
when low power is selected for this channel. No symbol in this position indicates that normal
high power is selected.
PAGE 72
key selects the selcall format required for the channel being
Barrett Australia format selcall is selected.
CCIR 493 (WA2 Australia) format selcall is selected.
Australian RDD format selcall is selected.
Scan table 1 enabled for this channel
Scan table 2 enabled for this channel
Scan table 1 & 2 enabled for this channel
key selects the RF power setting required.
will be displayed on the bottom line in the 4th character position.
BARRETT 950 HF TRANSCEIVER