Table of Contents
Advertisement
MAGNET ASSY ALIGNMENT
1. Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit.
2. Close the door, and while pressing the
3. Press the CHECK button, and set the loading mode.
4. Press the + ‚± button and chuck the disc.
5. Adjust the magnet assembly and magnet holder so that A=B as shown in the figure.
A B
DISC HOLDER A ALIGNMENT
1. Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit.
2. Close the door, and while pressing the
3. Press the CHECK button, and set the loading mode.
4. Press the + ‚± button and chuck the disc.
5. Press + ‚± or ≠º – button to stop the disc holder A slightly away from the disc.
6. Rotate and adjust the adjusting screw so that the center of the disc and that of the disc holder coincide.
Disc
p
button, ENTER button and GROUP 5 button simultaneously.
Magnet ASSY
Magnet holder
p
button, ENTER button and GROUP 5 button simultaneously.
a b
Disc holder A
a = b
— 20 —
Magnet ASSY
Disc holder A
Disc
Screw (For adjustment)
Screw (For adjustment)
Hide quick links:
Advertisement
Table of Contents
