Specifications - Rosen AV7500 Installation Manual

Step 3: PRE-DELIVERY AND RE-TEST
a. Start the vehicle (ensure that it is safe to do so, there are no tools or people under the hood)
b. Perform the following steps
•
•
•
•
c. Place the Owners Information package in the glove compartment
d. Place the IR headphones, remote control and game controller in a convenient location
10 Installer Setup
To access install setup menu: use the remote control, press EJECT-ENTER-1-1-2-0
•
To change AUX 2 input labeling, highlight AUX 2 label and scroll left/right using arrows.
•
To select EXT FMM, highlight EXT FMM and select on.
•
POD ADDR is used to manually set pod address
Autoà address is based on which port the pod is plugged into.
•
Selecting A or B allows you to manually set the pod's address
When manually selecting POD ADDR, an OSD will appear on opposite pod displaying what pod it
will be

Specifications

Supply Voltage
Current Consumption
Video Signal
Audio Signal
IR Audio Signal
Discs Played
Operating Temperature
Note: Specifications and designs are subject to modification without notice.
Rosen Entertainment Systems
AV7500 Installation Guide
Insert a DVD (in good condition) and select play
Re-check IR headphones and FMT audio
Eject the disc
Remove the protective films and clean the unit as needed
: 12V (+) ACC negative ground system, 11-16VDC operating range
: 7A max operating
: Composite video 1.0Vp-p 75 , NTSC/PAL
: Audio Output : 2Vrms, line output
: Channel A= 2.3 MHZ / 2.8 MHZ and Channel B= 3.2 MHZ / 3.8 MHZ
: (1) 5" (12cm) DVD-VIDEO Disc
(2) Compact Disc (CD-DA/CD-R/CD-RW/MP3)
: 0C to +60C
Copyright 2007 all rights reserved
AP1024 Rev A
Page 7