Connecting Ringflash To Generator; Specifications - Bowens RingflashPro Owner's Handbook Manual

connecting ringflash to generator
1. Before use ensure that the pack is
step
switched off and disconnected from
the mains supply.
2. Fit the Ringflash connectors to the
step
pack. To ensure latch retention first
insert the tab on the front of the cable
plug into the pack socket and then
press down firmly on the cable entry
end.
3. Switch the pack 'on' and 'test' flash
step
the Ringflash to ensure operational.
4. After use always make sure that the
step
Ringflash has adequate time to cool
down.
5. To remove the plug make sure all
step
power to the Ringflash is switched
'off', press the spring latch away from
the plug and lift from the cable entry
end.

specifications

Max Power:
Flash Duration (max):
Flash Duration (min):
Guide Number:
Cable Length:
Dimensions:
Aperature:
Weight (inc. cable):
Weight (inc. cable & bracket):
part codes
Ringflash Pro
Ringflash 130º Reflector
Ringflash 110º Diffuser
Flash Tube
12V 20W Halogen Modelling Lamp (117V)
24V 20W Halogen Modelling Lamp (230V)
Glass Lens (clear)
Glass Lens (frosted)
3000Ws
1/1600 sec @ 3000Ws
1/4500 sec @ 500Ws
86
5m
204mmø x 80mm (87.5mm with Baffle)
100mmø
2.7Kg
3.4Kg
BW7670
BW7674
BW7675
BW7673
BW7671
BW7672
BW7676
BW7677