Items Provided In Carton; Mounting Ringflash Pro To Light Stand; Mounting Ringflash Pro To Camera Stand - Bowens RingflashPro Owner's Handbook Manual

items provided in carton
1 x Ringflash Pro
1 x Camera Bracket
1 x Camera Mount Thread
10 x Modelling Lamps
1 x Flash Tube
1 x Clear Protective Glass Cover
1 x Frosted Protective Glass Cover
1 x Brass Spigot
mounting ringflash pro to light
1. Mount the Camera Bracket to the
step
selected support system as shown
in fig. 1.
2. Once the Ringflash is mounted onto
step
the selected support system, simply
tighten the mount screw as shown
in fig. 2 to hold in position.
fig. 1
mounting ringflash
1. To mount the Ringflash to a camera
step
stand first place the brass spigot on
top of the camera plate and fasten to
the camera mounting thead as
shown in fig. 3.
2. Next place the Ringflash camera
step
bracket on top of the brass spigot
and lock in place by tightening the
thumb screw as shown in fig. 4.
stand
3. Attach the Ringflash to the camea
step
bracket as shown in fig. 5 and secure
in place using the thumb screws
provided.
N.B. When attaching the Ringflash to
the camera bracket ensure that the
Ringflash handle is positioned to one
side to allow the Ringflash complete
freedom of movement without the
handle coming into contact with the
camea stand.
4. Once the Ringflash is secured in
step
place, next attach the camera to the
camera bracket. Your setup should
appear as shown in fig. 6.
fig. 2
pro to camera stand mounting ringflash pro to camera stand