Table of Contents
Advertisement
The following models (or equivalents) are recommended in
this system. The S-Video signal and balanced audio signal
are also recommended to use obtaining a quality edited
outputs.
Production Mixer
Character Generator
External Camera
Playback VTR
Recording VTR
Editing Controller
Monitor TV
(1)
Connect the coaxial cables between the Advance
Reference Output Connectors (120) on the WJ MX50
and the REF-IN connector on both Playback VTR-1 and
-2
(2) Connect the audio cables between the Source 1 Audio
Input Conector (141) /Source 2 Audio Input Connector
(140)/Program Out-1 Audio Output Connector (135) on
the WJ MX50 and the AUDIO OUT connector/AUDIO
IN
connector
VTR-2/Recording VTR respectively.
(3) Set the Source Selection Switch (114) on the WJ-MX50
to the S1-2 position.
(4)
Connect
the
PLAYER-1/PLAYER-2/RECORDER connectors on the
Interface Unit of AG-A800 and the REMOTE connector
on the Playback VTR-1/Playback VTR-2/Recording
VTR respectively.
(5)
Connect the S-Video Cables between the Source 1
Y/C Input Connector (1 Hi/Source 2 Y/C Connector
(113)/Program Out-1 Y/C Output Connector (124)
on the WJ-MX50 and the S-VIDEO OUT/S VIDEO
IN connectors on the Playback VTR-1/Playback
VTR-2/Recording VTR respectively.
(6)
Connect the coaxial cable between the Black Burst
Output Connector (128) on the WJ-MX50 and the REF
IN connector on the Interface Unit of AG-A800
(7)
Connect the control cable between the Editing Control
Connector (132) and the SW I/F connector on the
Interface Unit of AG-A-800
(8)
Connect the control cable between the TO I/F UNIT
connector on the AG-A800 and the TO KEY BOARD
connector on the Interface Unit of AG-A800
(9)
Connect the S Video Cable between the S-Video
Output Connector on the WV-D5100 and the External
Y/C Input Connector (122) on the WJ-MX50
(10) Connect the coaxial cable between the Preview Output
Connector (127) on the WJ-MX50 and the Video Input
Connector on the Monitor TV
(11) Connect the coaxial cables between the VIDEO
OUT connectors on the Playback VTR-1/Playback
VTR-2/Recording VTR and the Video Input Connectors
on the Monitor TV respectively.
(12) Connect the audio cable between the Audio Output on
the External Audio Source and the Auxiliary Audio Input
1 Jacks (137) on the WJ-MX50.
on
the
PlaybackVTR-1/Playback
control
cables
WJ-MX50
WJ-KB50
WV-D510(
AG-7650
AG-7750
AG-A800
between
the
- 1 6 -
Hide quick links:
Advertisement
Table of Contents
