Converting The Safety Harness For One Child - InStep Two Seat Bicycle Trailer User Manual

Converting the Safety Harness for One Child

1. Start with the straps in the two-child position.
Unfasten the shoulder straps from the center
lap buckle on both sets of safety harnesses.
Left Safety
Harness
.
2. Snap the left shoulder strap from the right set
of safety harnesses into the center lap buckle.
Then, snap the right shoulder strap from
the left set of safety harness into the center
buckle.
Note: By doing this you will be flipping the
buckle prong on each strap, which will twist
the shoulder straps.
Left Safety
Harness
Fold side buckles
Right Safety
Harness
Right Safety
Harness
down
3. To untwist the straps,
locate the shoulder strap
anchors on the seat
back. Pull the anchor
away from the seat.
4. Insert the anchor through
the slit in the seat back,
pushing it towards the
front.
5. Untwist the strap and
re-insert the safety strap
anchor through the slit
to the back of the seat.
Repeat steps 3-5 for the
opposite side.
6. The safety straps are now in the one child
position as shown below.
Center Safety
Important! When not in use, fold the lip of the lap
buckle pad over the buckle opening and secure
with the Velcro™ tabs
Harness
13