Using The 5-Point Safety Harness; Using The 5-Point Safety Harness With Two Children; Adjusting The Shoulder Straps - InStep Two Seat Bicycle Trailer User Manual

Using the 5- Point Safety Harness

Using the 5-Point Safety Harness with Two Children

Avoid serious injury from falling or sliding out.
Always properly secure the passenger with the
5-Point Safety Harness.
It may be dangerous to leave your child unattend-
ed. Never leave your child unattended in or near
the bicycle trailer.
1. Unbuckle the shoulder
straps from the center
lap buckle.
Seat the child in
2.
the center of the
passenger
compartment.
3. Place the lap belt
buckle between the
child's legs.
Adjusting the Shoulder Strap Height
There are three slots on the back of the seat.
These slots are used to adjust the proper height of
the shoulder straps to your child's height. To adjust
the shoulder strap height:
1. Starting from the back
of the seat, pull the
shoulder strap anchor
away form the seat.
2. Insert the anchor
through the slit in the
seat, pushing it towards
the front.
12
WARNING!
3. Insert the anchor
through the slit in the
front of the seat at the
desired height.
4. Pull the strap and
anchor all the way
through to the back.
Make sure the strap is
properly anchored on
the seat back. Repeat
these steps for the
opposite strap.
4. Place the shoulder
straps over the child's
shoulders with the waist
belt under the child's
arms.
See Adjusting the
Shoulder Strap Height
below for more detail.
Clip the shoulder straps
5.
into the lap belt buckle,
and adjust the shoulder
straps.
Important! Adjust
the shoulder straps and
lap buckle so they meet
at the child's stomach.