To Shoot A Snapshot - BenQ GH200 Series User Manual

To shoot a snapshot

1.
Press (REC) to turn on the camera.
[ ]
The camera will enter the REC mode.
Make sure is on the display.
Snapshot mode icon
Remaining Snapshot Memory
Capacity
2.
Point the camera at
the subject.
You can zoom the
image, if you want.
3.
Half-press the
shutter button to focus the image.
When focus is complete, the camera will
beep, the back lamp will light green, and
the focus frame will turn green.
Half-press
Beep, beep (Image is in focus.)
Zoom controller
Press lightly
When you half-press the shutter button, the
until the button
stops.
camera automatically adjusts exposure and
focuses on the subject it is currently pointed at.
Mastering how much pressure is required for a
half-press and a full-press of the shutter button is
an important technique for good-looking images.
Wide Angle
Back lamp
26
Monitor screen
Shutter button
[ ] (REC)
Telephoto
Focus frame