Charge The Battery - BenQ GH200 Series User Manual

Charge the Battery

You can use either of the two following methods to charge the camera's battery.
• USB adapter
• USB connection to a computer
• To charge with the USB adapter
1.
Turn off the camera.
Check to make sure that the camera's monitor screen is blank.
If it isn't, press [ON/OFF] (Power) to turn off the camera.
2.
Connect the camera with the USB cable as shown.
3.
Connect the other end with the USB
adapter and plug it into a power outlet or
with the USB port of PC directly for
charging.
Back Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
4.
After charging is complete, disconnect the USB cable from the camera and
then unplug the power cord from the power outlet.
• To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected directly to a
computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the camera's
battery over a USB connection. If this happens, use of the USB adapter that comes with
Description
Charging
Abnormal ambient temperature,
USB-AC adaptor problem, or battery
problem
Charging complete
18
[ON/OFF] (Power)
Back lamp