Software Upgrades - Honeywell IQ Express Reference Manual

The System tab contain specific
information about your PC's operating
system.
6.

Software Upgrades

Honeywell Analytics will release new
versions of MultiPro IQ Express software
from time to time. Upgrades may be
loaded onto the PC from a CD or may be
downloaded from the Internet.
To install the new version from CD, simply
place the disk in your PC's CD-tray. The
upload will start automatically and will
immediately prompt you to install the
software.
To upload the new Flash File from the
Internet, go to the Biodownload's Software
Downloads website at:
http://www.biodownloads.com
To upgrade the flash, download the new
flash from Biodownloads.com to the
following folder: C:\ Program Files \
Biosystems \ MultiPro IQ Express \ Dock
Flash. Then run the Flash Upload
program, which is located in the same
directory.
The following screen will be shown when
the PC is ready to proceed with the flash
upgrade.
Click Yes. The status of the upload is
shown at the far right of the screen in the
dock's information page.
The dock will also indicate that the Flash
is being uploaded.
CAUTION
Interfering with the flash
upload may result in damage to the
MultiPro IQ Express Dock.
Once the upload is completed, you'll need
to restart the PC for the new settings to
take effect.
The dock will instruct you to unplug it.
Disconnect the MultiPro IQ Express Dock
from the PC and click OK. If an AC power
supply is being used to power the dock,
unplug it as well. Once the display on the
dock goes blank, reconnect the dock to
the PC. The AC power supply may also
be plugged back in at that time.
24