Table of Contents
Advertisement
LED Color
None
Use the CK3, CN3, and CN4 with the DX4 Ethernet Dock
To use a CK3, CN3, or CN4 computer with the DX4 Ethernet dock, you need to
install a software update on the computer as described in the next procedure.
Note: You do not need the software update to use these computers with the DX4 charge-
only dock.
To download and install the software update
1. Go to
2. In the Product Category list, select Computers.
3. In the Product Family list, select Handheld Computers.
4. In the Product list, select CK3 Mobile Computer, CN3 Mobile Computer, or CN4
5. In the OS/Firmware/Drivers list:
6. For the CK3, click CK3 FlexDock Ethernet Support ver. 1.xx.
7. For the CN3 or CN4, click CN3/CN4 FlexDock Ethernet support ver. 1.xx.
8. Follow the prompts to download the file to your desktop PC. You need to login to
9. Copy the file to the mobile computer. For help, see the computer user manual.
10. On the mobile computer, browse to the .cab file and run the file to install the
For information on installing .cab files automatically at boot time, see the com-
puter user manual.
About Custom Configurations
If you need a custom configuration for your FlexDock, you can order a Desktop,
Dual, or Quad Base without product or battery cups, and then order cups for your
specific combination of products and batteries. You can also order blank covers for
bays you are not using. For more information, contact
8
Description
Computer is not communicating with the dock, or the
dock is not connected to power.
www.honeywellaidc.com
Mobile Computer, and then click Submit. The Downloads page for the computer
appears.
download files.
software update. After the computer automatically reboots, the computer is
ready to use with the DX4.
and select Support > Downloads.
Customer
Support.
FlexDock User Guide
Advertisement
Table of Contents
