Cleaning And Maintenance; Handle And Care Of A Disc - Akai ALED2402 User Manual

Audio setup page
AUDIO OUT
● Select SPDIF OFF to switch off the digital audio signal output.
● Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF PCM to set the digital audio signal output to PCM format.
Digital setup page
DYNAMIC
● Select the value for the dynamic range compression to avoid losing sound
details resulting from a low volume.
DUAL MONO
● Stereo: both channels as is. STEREO is the default setting.
● L-Mono: left channel only.
● R-Mono: right channel only.
● Mix-Mono: the average of both the left and right channel.
This function is only available for Dolby AC-3 encoded 2-channel
i
discs.
6.

Cleaning and maintenance

WARNING
!
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
6.1

Handle and care of a disc

● Hold the disc with fingers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
● Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
20