Zoom; View - Garmin Fishfinder 160 Blue Owner's Manual

www.reelschematic.com
www.reelschematic.com

Zoom

The Zoom Adjustment is used to quickly select a display zoom scale.
To change the Zoom Scale:
1. Highlight 'Zoom' on the Adjustment Bar.
2. Using the UP or DOWN Arrow, select the desired display zoom level.
When a scale other than 'No Zoom' is selected, the Adjustment Bar will
display a new selection labeled 'View.'

View

The View Adjustment is available only when a Zoom Scale other than
'No Zoom' is selected. This setting allows you to select a specific area to
view on the display, or allows the unit to automatically select a viewing area
based on the bottom.
To change the View:
1. Highlight 'View 'on the Adjustment Bar.
2. Press the UP or DOWN Arrows to change the setting.
To have the unit automatically set a View:
1. Highlight 'View' on the Adjustment Bar.
2. Using the UP or DOWN Arrow, move the slider to the top or bottom of
the range, then release and press the Arrow again.
Unit Operation
The Adjustment Bar
Zoom Adjustment
View Adjustment
13