Page 7
Alarms Introduction System Calibration Units Memory...
Page 8
Introduction Water Depth Battery Voltage Water Temperature* Speed Over Water* Fish Thermocline and Structure Bottom Shape and Type...
Page 9
Installation Wide cone angle Narrow cone angle Optional Package dead zone fish not seen...
Page 10
Installation DO NOT Mount the transducer parallel with the bottom. Apply marine sealant to all screw threads to prevent water from seeping into the transom. DO NOT Mount the transducer cable cover well above the waterline. Transducer should extend 1/8" below fiberglass hull or 3/8"...
Page 11
Installation Testing the Location Installing the Transducer...
On the Water On the Water This fi sh is currently in a Dead Zone and is not detected by the sonar. The fi sh is in the coverage area of the transducer, but remember the fi rst strong return sets the bottom level.
Page 37
On the Water On the Water 4" 10" 15" 20" 25" 30" 35" 40" 45" 45"...