Speaker Connections - Panasonic SC-BT205 Operating Instructions Manual

Speaker connections

Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Main unit
Setup example
Speaker cable for center
speaker (Green)
≥Don't use a front speaker as a surround speaker or vice versa. Verify the type of speaker with label on the rear label of the speaker
before connecting the appropriate cable.
≥Pay attention to the type of speaker and the connector colour when you place the speakers.
PURPLE GREEN
SUBWOOFER CENTER
6
3 Ω
SUB-
WOOFER
Main unit
Connect to the terminals of the same colour.
Use of the speaker cable stickers is convenient when making cable connections.
≥Match the connector colour and the type of speaker as shown above.
≥Extending the speaker cables may damage the speakers and sound quality will negatively be affected.
NOTE
SPEAKERS
AC IN
6 5 2 1 4 3
3 Ω SUB- 3 Ω 3 Ω 3 Ω
R L R L
WOOFER CENTER FRONT SURROUND
Sheet of speaker cable
stickers
RED WHITE GREY
FRONT FRONT SURROUND
(R ch ) (L ch ) (R ch )
SPEAKERS
+
-
5 2 1 4 3
3 Ω 3 Ω 3 Ω
R L R L
CENTER FRONT SURROUND
AUX(TV)
Y P
B OPTICAL
FM ANT
+
75Ω
-
P 2(STB) 1(TV)
R
VIDEO COMPONENT
AV OUT OUT VIDEO OUT DIGITAL IN
e.g. Front speaker (L)
Speaker cable sticker (included)
e.g.
BLUE
SURROUND
(L ch )
Surround speaker (L )
DIGITAL
TRANSMITTER
FRONT
Lch
1
Insert the wire fully,
taking care not to insert
beyond the wire
insulation.
: White
: Blue
Push!
Be careful not to cross
(short-circuit) or reverse
the polarity of the
speaker wires as doing
so may damage the
speakers.
Do not
RQT9516
9
9