Toro Greensmaster TriFlex 3320/3420 Service Manual page 283

Roller Bearing Installation Tools
Washers and spacer used to install bearings and seals
into front and rear rollers (Fig. 7).
Seal installation washer:
Seal installation spacer:
Bearing installation washer: 104--6126
As an alternative to using washers and spacers listed
above, a special tool set is available that can be used for
roller bearing and seal installation (Fig. 8).
Toro Part Number: TOR4105
Diameter/Circumference Measuring Tape
Spring steel measuring tape for accurately measuring
the circumference and outside diameter of cutting reel
and other spherical components. Tape calibration is in
fixed inch readings (no adjustments).
Toro Part Number: TOR6023
Turf Evaluator Tool
Many turf discrepancies are subtle and require closer
examination. In these instances, the Turf Evaluator
grass viewing tool is helpful. It can assist turf managers
and service technicians in determining causes for poor
reel mower performance and in comparing the effective
height--of--cut of one mowed surface to another. This
tool should be used with the Toro Guide to Evaluation
Reel Mower Performance and Using the TurfEvaluator
(Toro part no. 97931SL).
Toro Model Number: 04399
Greensmaster 3320/3420
107--8133
107--3505
Page 8 - - 5
Seal Installation
Seal Installation
Washer Spacer
(black)
Figure 7
Figure 8
Figure 9
Figure 10
Bearing Installation
Washer
(yellow)
DPA Cutting Units