Table of Contents
Advertisement
60 RECEIVE CHANNELS
The uh078sx Deluxe also has 60 receive only channels (CH41 to CH100)
which can be programmed with frequencies ranging from 450-512MHz (in
12.5kHz steps).
If you know the frequency you may store it manually.
MANUAL PROGRAMMING
Turn power off. Press and hold
power back on. The channel indicator flashes the
lowest available empty channel. You may use the
or
to select another channel.
Press
. The frequency indicator flashes the
MHz whole number value to be set.
Press
or
number value (between 450 and 512 MHz).
Press or to move left or right between the
MHz whole number and the MHz decimal value
(in 12.5kHz steps) and press
change values.
When finished press
flashes.
Press
or
and hold
to store setting.
A confirmation tone sounds. The channel is automatically entered into the
OS scan memory.
DELETING A PROGRAMMED RECEIVE CHANNEL
Follow the steps in Manual Programming to enter a frequency for a desired
channel.
Select 0 for the first frequency digit and then press
Press
or
exit programming mode.
while turning
to select the MHz whole
or
, the channel indictor
to select the next channel for programming or press
to select another channel or press and hold
20
to
.
to
Advertisement
Table of Contents
