Optelec
8.2.2 Navigating in Notes
Please use the following commands to navigate in the text:
Chord command
Previous character
Next character
Previous line
Next line
Previous word
Next word
The cursor routing keys can also be used to move the cursor and navigate through
the text.
8.2.3 Defining a block
Please follow the procedure below to define a text block:
1. Place the cursor at the beginning of the defined block;
2. Press Ctrl+J to mark the beginning of the block;
3. Move the cursor to the end of the block;
4. Press Ctrl+K to mark the end of the block.
The defined block can be copied or cut and pasted elsewhere in the text. The
shortcut keys commands for cut, copy and paste are, Ctrl+X, Ctrl+C and Ctrl+V.
The commands can also be found in the Notes menu.
8.2.4 Reading in Notes
The following commands have been defined for reading text in Notes:
Command
Scroll left
Line up
Back to cursor
Line down
Scroll right
English
Keyboard Key
Space + b3
Space + b6
Space + b1
Space + b4
Space + b2
Space + b5
ALVA BC640 Key
Thumb key 1
Thumb key 2
Thumb key 3
Thumb key 4
Thumb key 5
Page 37