Table of Contents
Advertisement
Optelec
*FP* Default volume: 7
Default volume is the volume of the Braille Audio Feature Pack when the ALVA
BC640 is switched on. The default volume is 7.
Sounds: off
Sounds can be switched on or off. When switched on, a short beep is being
generated on each key press. If you prefer no sounds to be generated, select "off".
For each group of keys the beeps can be switched on or off individually.
Cursor routing sound: on
Cursor routing sound can be switched on or off. When switched on, a short beep is
generated on each cursor routing key press. If you prefer no sounds to be generated
when a cursor routing key is pressed, select off.
eTouch key sound: on
eTouch key sound can be switched on or off. When switched on, a short beep is
generated on each eTouch key press. If you prefer no sounds to be generated when
an eTouch key is pressed, select off.
Thumb key sound: on
Thumb key sound can be switched on or off. When switched on, a short beep is
generated on each thumbkey press. If you prefer no sounds to be generated when a
Thumb key is pressed, select off.
Smartpad sound: on
Smartpad sound can be switched on or off. When swiched on, a short beep is
generated on each Smartpad key press. If you prefer no sounds to be generated
when a Smartpad key is pressed, select off.
Set time: 01:01:00
Set time. This setting allows you to set the time. Press the Smartpad Enter key to
enter the modification mode. Use the Smartpad arrow up and down keys to change
English
Page 26
Advertisement
Table of Contents
