Table of Contents
Advertisement
Optelec
Status cells: Left
Status cells. The default position of the status cells is on the left. Select the position
of the status cells either on the left or right side on the Braille display.
Split point configuration menu
When split point is enabled, the Braille display will be divided into two segments.
This enables you to read and interact with two devices simultaneously. For example,
the Bluetooth® screen reader output of a mobile phone can be displayed on the first
segment of the Braille display while the second segment can be used to read the PC
screen reader output via the USB connection. The cell between the two segments will
have all 8 dots raised to indicate where the first segment ends and the second
segment starts. By default the first segment will display the information send via the
Bluetooth® connection. The second segment will display the information send via the
USB connection. If you own an ALVA BC60 you can connect e.g. two PCs using the
two USB ports on the back side of the ALVA BC680. To be able to use the split point
feature, please make sure your screen reader supports this function. To find out if
your screen reader supports the ALVA BC6 split point functionality, please refer to
your screen reader documentation.
Split point configuration menu : Split point active: off
Split point active. The first item in the Split point Configuration menu is the option to
enable or disable the split point feature. To enable or disable the split point feature
select on or off using the Smartpad arrow up and down keys. Alternatively, you might
enable or disable the split point feature by pressing the hotkeys Smartpad 2 + 3 +
Enter.
Split point configuration menu: Split point: 5
Split point. Adjust the number of cells used for the split point function by selecting
the number of cells with the Smartpad arrow up and down keys.
Split point configuration menu: Display layout: BT-USB
Display layout. This option selects which connection is linked to a Braille display
segment. By default the Bluetooth connection is linked to the first segment and the
USB connection to the second segment. On an ALVA BC640 with Feature Pack the
display layout can be changed using the quick menu Space+M. In this menu select
the "Preferred Interface" and toggle the option by activating it with the cursor routing.
The hotkey on the ALVA BC680 to change the display layout is Right Smartpad 2 +
Right Smartpad 3 + Smartpad up and down.
English
Page 23
Advertisement
Table of Contents
