Advertisement
VII
I.
For the Imagine W1, line up each mounting screw
on the wall-mounting bracket with the keyhole
slots on the speaker, and let the speaker slide
straight down, allowing each screw head to
slide-and-lock into the slot for a secure mount.
I . X
For the Imagine W3, fit the speaker's contoured
groove into the mounting edge of the bracket.
Tabletop Feet
I.
The provided feet allow for the speaker to be placed on a tabletop below the display in a centre
channel orientation.
II. The rubber boot on the metal bracket is reversible. Depending on the way you install the boot on
the bracket, this will set the speaker at 90 degrees or 75 degrees (tilted back 15 degrees) from
the table surface.
III. To install the tabletop feet, attach the feet to the
threaded inserts on the back of the speaker
using the provided 1/4"-20 threaded bolts.
Careful not to strip the threads.
4
Advertisement
