Advertisement
INSTALLING...
On-Wall Mounting
I.
All PSB On-Wall Speakers are supplied with a custom designed wall-mounting bracket for ease
of installation.
Imagine W1 Wall Bracket
Imagine W3 Wall Bracket
II.
Wall mounting a speaker will require certain tools and materials, as well as a certain level of
expertise. For example, if wires are to be hidden within the walls of your home, we highly suggest
consulting a local CEDIA certified installer in your area. To find a CEDIA certified installer, please
visit www.cedia.net
III.
For successful on-wall mounting, the following tools will be required: tape measure, pencil, level,
screws, anchors, screwdrivers, power drill, and drill bits.
I . V
Prior to mounting, it is highly recommended to determine the best location for each on-wall
speaker in relation to your listening position. For proper on-wall positioning, please refer to the
"Positioning" section of this owner's guide.
V.
Ensure the selected locations for wall-mounting do not conceal electrical wiring or plumbing.
Ensure the speaker clears surrounding physical structures and electrical fixtures and wiring.
V
I.
Using the provided wall bracket template, mark the location of the pilot holes and pre-drill each
hole for the mounting screws (not included) using the correct mounting hardware for the specific
wall material.
V . II
If there is no stud behind the chosen location, use wall anchors (not included) to secure the
bracket screws, and follow the wall anchor manufacturer's directions.
Note: It is recommended that you have at least one mounting point
attached into a stud for better holding strength. Use appropriate
hardware depending on the building material.
3
3
Advertisement
