Advertisement

ALPHA AM5
OWNER'S GUIDE
www.psbspeakers.com

Advertisement

Table of Contents
loading

Summary of Contents for PSB ALPHA AM5

  • Page 1 ALPHA AM5 OWNER’S GUIDE www.psbspeakers.com...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS FCC Warnings 1. Read these instructions. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may 2. Keep these instructions. not cause harmful interference, and (2) this device must accept 3.
  • Page 3 The packing materials are designed to protect the speakers from damage during transport, however if visible or concealed damage is to occur in handling, it should be reported at once to your authorized PSB dealer, or to the shipping company that delivered your loudspeakers.
  • Page 4 Front of the Amplified Speaker Status Light Remote Sensor Control Dial Status Light: Displays different colors to show: - which source is playing - a listening mode is chosen - maximum and minimum volume, bass and treble controls - Bluetooth pairing mode Control Dial: Turn: to adjust the volume...
  • Page 5 Subwoofer output can be activated using the supplied remote control, which will also redirect part of the low frequency content to the subwoofer. Connect the Alpha AM5 to the low-level input of the external subwoofer using a subwoofer interconnect cable.
  • Page 6: Remote Control

    Remote Control Power On/Off Bluetooth Interrupt Volume Control Mute Input Selection Input Selection Subwoofer ON/OFF Sound Mode Selection MODE Treble Control Bass Control TREBLE BASS Place the two AAA batteries supplied into the remote control. Be careful to ensure that it is correctly inserted according to the polarity (+/-).
  • Page 7: Infrared Learning

    I. Hold MUTE button for 5 seconds to enable the IR learning feature. The Status Light on the front of the powered speaker will flash Red and White. II. Press the function/button, POWER ON for example, to be learned from PSB PSR-1 remote control. Status Light flashes Blue twice to show received command, then change to solid Blue.
  • Page 8: Bluetooth Source

    I. Use the input selections buttons on the remote control to switch to one of the other sources (Analogue, Phono, USB or Optical). II. Open the Bluetooth settings on your mobile device and turn off the Bluetooth connection or “unpair” the device from the Alpha AM5 The active Bluetooth device can be disconnected by pressing the Bluetooth button on the remote control for 3 seconds.
  • Page 9: Troubleshooting

    Positioning I. As symmetrically as possible, place your Alpha AM5 Powered Speakers at a comfortable listening location with no obstructions at the front or back. II. We recommend at least three inches of clearance around the back of both speakers. Good air circulation is required for heat dissipation, and to ensure proper performance of the rear-firing ports.
  • Page 10 20-066 AM5 Owner’s Manual...

Table of Contents