SAFETY PRECAUTIONS
•
Always keep critical tool markings, such as labels
and warning stickers legible.
•
Always replace parts with replacement parts recom-
mended by Stanley Hydraulic Tools.
•
Check fastener tightness often and before each use
daily.
•
Never operate the tool if you cannot be sure that
underground utilities are not present.
•
Do not wear loose fitting clothing when operating the
tool.
•
Warning: Hydraulic fluid under pressure could cause
skin injection injury. If you are injured by hydraulic
fluid, get medical attention immediately.
•
Keep all body parts away from the working tool.
•
When handling material or the tool bit, wear your
(PPE) Personal Protection Equipment.
•
Be observant of the hydraulic hoses lying about the
work area, they can be a tripping hazard.
•
Always de-energize the hydraulic system when
changing a tool bit.
•
Take caution when changing a tool bit, tool bits can
get very hot.
•
Never use the tool in an explosive atmosphere,
sparks from the breaking process could ignite ex-
plosive gas.
•
Use proper lifting techniques when handling the tool,
get help from a co-worker and do not over-reach.
6 ► CH15 User Manual
•
Use proper protection from falling or flying debris,
keep bystanders at a safe distance.
•
Do not exceed the rated flow and pressure. See
Specifications in this manual for correct flow rate
and pressure rating. Rapid failure of the internal
seals may result.
•
Failure to use hydraulic hose labeled and certified
as non-conductive when using hydraulic tools on or
near electric lines may result in death or serious in-
jury.
•
Handle and route hose carefully to avoid kinking,
abrasions, cutting, or contact with high temperature
surfaces. Do not use hose to pull or lift tools, power
units, etc.
•
Check entire hose for cuts, cracks, leaks, abrasions,
bulges, or damage to couplings if any of these con-
ditions exist, replace the hose immediately. Never
use tape or any device to attempt to mend the hose.
•
Do not use conductive hose on or near electric lines.
This hose is not labeled or certified as non-conduc-
tive. Using this hose on or near electrical lines may
result in death or serious injury.