Remote Control; Care And Maintenance - Jensen CD6111 Instruction Manual

REMOTE CONTROL

The remote control will allow you to control the basic functions of the CD6111.
The remote control sensor is at the top left of the MONO (18) button.
AMS = AS / PS
PEQ = iEQ
MOD = Mode
LOC = Lo / DX
BND = Band
SCN = Scan, AM, FM
MUT = Mute
MO = St / Mo
DISP = Clock / Frequency

CARE AND MAINTENANCE

CD Player
The following guidelines will help you extend the life of your CD player:
1.
2.
S
3.
VOL
4.
5.
VOL
D U
LOUD
TR. DN TR. UP
Compact Discs
BND SCN MOD
CD-R / CD-RW
LOC AMS PEQ
Depending on media type and method of "recording / burning", some CD-R/RWs may be
incompatible with this unit. After "recording / burning" the session must be closed. Please
MO MUT DISP
refer to your software's recommended procedures for closing a disc / session. Review your
SCN RPT
PAU
recording software to familiarize yourself with the correct "recording / burning" procedures. We
1 2 3
recommend using the latest versions of ROXIO
4 5 6
In addition, this unit will only recognize the CDDA (Compact Disc Digital Audio) format
SHUF DN UP
"recorded / burned" onto a CD-R/RW. This unit does not support .MP3, .WMA, .WAV, .OGG or
other formats. The CDDA format is the standard format of an "original store bought" CD. When
recording / burning a CD-R/RW make sure the CDDA format is selected.
CD Care and Handling
Dirt, dust, scratches and warpage can cause skips in the playback and deterioration of sound
quality. Please follow these guidelines to take care of your compact discs.
1.
2.
3.
4.
5.
10
When cleaning the vehicle interior, do not get water or cleaning fluids on the unit.
The CD player will not operate properly in extreme hot/cold or under damp conditions. In
case of such conditions, wait until the vehicle interior reaches a normal temperature or
any condensation on the disc player lens has evaporated before using the player.
Never insert anything other than round 5" CDs into the player. Attempting to insert CDs of
other sizes (even with an adaptor) will cause damage not covered by the warranty.
Always remove the CD when the player is not is use.
The unit is designed with a vibration dampening CD mechanism to minimize interruption
of disc play due to normal vibration in a moving vehicle. However, occasional sound skips
may occur when driving on very rough roads. This will not scratch or damage the disc,
and normal play will resume when the rough conditions cease.
Carefully wipe fingerprints, dust and dirt from the disc's playing surface with a soft cloth.
Wipe in a straight motion from the inside to the outside of the disc.
Never use chemicals such as record sprays or household cleaners to clean CDs, as they
can irreparably damage the disc's surface.
Discs should be kept in their storage cases when not in use.
Do not expose discs to direct sunlight, high temperatures or high humidity for long
periods.
Do not stick paper, tape or labels on disc surfaces.
CD6111
TM TM
or NERO burning software.