Sharp AL-2020 Operation Manual page 73

Bit depth
Sensor
Scanning speed
Memory
Power supply
Power consumption
Width
Overall
dimensions
Depth
Weight
8
(Approximately) *
Width
Unit
Depth
dimensions
Height
Operating conditions
Emulation
Interface port
Noise level
Emission concentration
(measurement according
to RAL-UZ 62: Edition
Jan. 2002)
*1 When standard A4 paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment conditions.
*6 Print speed during printing of the second sheet and following sheets when using A4 plain
paper in the tray 1 and performing continuous one-sided printing of the same page.
*7 The first-copy time is measured after the power save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
*8 Not including TD and drum cartridges.
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
AL-2020
1 bit or 8 bit/pixel
Color CCD
Max. 2.88ms/line
16 MB
±
Local voltage 10% (For this copier's power supply requirement, see
the name plate located on the back of the unit.)
Max. 1.0kW
607.6mm
462.5mm
16.0kg
518.0mm
462.5mm
295.6mm
Temperature: 10°C to 30°C
Humidity: 20% to 85%
SHARP GDI
USB interface (USB 2.0 Full Speed)
Sound power level
LwA
Copying mode: 6.4B
Standby mode: 3.3B
Sound pressure level
LpA
Copying mode: 48dB(A)
Standby mode: 17dB(A)
Sound pressure level
LpA
Copying mode: 52dB(A)
Standby mode: 17dB(A)
Noise emission measurement in accordance with ISO7779.
3
Ozone:0.02 mg/m or less
3
Dust:0.075 mg/m or less
3
Styrene:0.07 mg/m or less
AL-2040
809mm
492.5mm
23.0kg
492.5mm
465.4mm
(reference) (Bystander positions)
(reference) (Operator position)
9
71